2 Remove headlight 4 bolts hold it on.
3 Open head light Remove clips( place in oven 350 for 3 to 5 mins or use a hair dryer be very carefull and remove all bulbs)
4 Mask and sand bottom of the lens ( use 200 grit for bottom and 400 for the rest of the lens) tape the lens and use your finger nail along the crease. Then use a sharp knife to cut along crease. Remove extra masking tape.
5 Remove the low beam diffuser.
6 Mask the refective surface (take your time) Remeber leave some of it exposed and sand with 330 grit.
7 One headlight took me 3 hours to do so don't rush.
8 Place every thing back together.
![Paveikslėlis](http://img687.imageshack.us/img687/9673/imgp0519.jpg)
![Paveikslėlis](http://img251.imageshack.us/img251/6964/imgp0521.jpg)
![Paveikslėlis](http://img690.imageshack.us/img690/1041/imgp0522a.jpg)
![Paveikslėlis](http://img687.imageshack.us/img687/2738/imgp0527b.jpg)
![Paveikslėlis](http://img40.imageshack.us/img40/9506/imgp0523q.jpg)
![Paveikslėlis](http://img17.imageshack.us/img17/9410/imgp0524.jpg)
![Paveikslėlis](http://img522.imageshack.us/img522/1754/imgp0526.jpg)
![Paveikslėlis](http://img706.imageshack.us/img706/562/imgp0531.jpg)
![Paveikslėlis](http://img710.imageshack.us/img710/7687/imgp0532.jpg)